Low Cable Crossover
A beginner isolation movement that trains the chest with a cable machine.
Force Type
Push
direction of effort
Difficulty
Beginner
training level
Variations
0
equipment swaps
Muscles
2
primary + secondary
The verdict
Low Cable Crossover has 4-step instructions, documented to a similar depth as most of the 84 chest exercises PlainExercise catalogues.
Ranked against the 84 chest exercises PlainExercise currently catalogues, not the full exercise-science literature.
Catalog lens
Two ways this record sits in the source corpus
These are placement measures for the documented record, not a score for exercise quality, safety, or suitability.
Instruction steps
#484 of 868
Typical documentation depth
Numbered source steps, ranked across every documented exercise.
Instruction text
#497 of 868
Typical documentation depth
A separate character-length placement prevents step count from standing in for explanatory detail.
Low Cable Crossover vs every catalogued exercise by instruction-text length
Where this record's instruction-character count sits among all 873 Free Exercise DB exercises with instructions, not a rating of the movement itself.
551 496th of 873 higher than 375 of 873 exercises
All exercises, banded by instruction-text character count
Each bar is a band; taller bars hold more exercises. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.
Source Free Exercise DB · 2026-07-10
Low Cable Crossover is documented from the Free Exercise DB (CC0) extract, last ingested July 2026. Classification, muscle roles and instruction text are source facts; the placement and cohort measures on this page are computed by PlainExercise and are not a rating of the movement.
What the Low Cable Crossover Data Reveals · DOC · PUSH/ISOLATION
Low Cable Crossover stands out on mechanic class: joint involvement separates this page from isolation peers.
A mid-length step list is enough detail to compare form without the longest upstream essays.
Across 84 catalogued chest movements, the average instruction record is 667 characters and 4.6 steps; 59 of those (70.2%) clear the same ≥500-character rich bar used here. This page ranks #47 of 84 by instruction-character length (82.7% of the cohort average).
Among the 81 exercises that also use a cable machine, average instruction length is 786 characters; 61 of those peers are longer than this record. Equipment-matched peers are the honest comparison when you are choosing a substitute implement for the same pattern.
Other well-documented chest movements (same ≥500-character bar):
- One-Arm Flat Bench Dumbbell Flye (6 steps, 1,255 chars)
- Bent-Arm Dumbbell Pullover (6 steps, 1,204 chars)
- Straight-Arm Dumbbell Pullover (6 steps, 1,172 chars)
- Hammer Grip Incline DB Bench Press (7 steps, 1,163 chars)
- Incline Dumbbell Bench With Palms Facing In (7 steps, 1,163 chars)
Context matters: taxonomy (level, mechanic, force, musculature, equipment) does not account for individual biomechanics, joint history, or recovery. Common-mistake framing below is derived from classification fields, not case-specific coaching. Not medical or personal-training advice. Consult a physician or certified trainer before starting, especially with injuries, cardiovascular conditions, recent surgery, or pregnancy.
Low Cable Crossover catalog footprint
Among 84 exercises whose primary muscle is chest, Low Cable Crossover ranks #34 by catalogued variation count. The upstream file attaches 2 images to this slug. See the step-count ranking for chest for peer documentation depth.
Muscles worked
The Free Exercise DB classifies each muscle as primary or secondary. It does not measure activation, so we show involvement, not percentages.
Source: Free Exercise DB primary/secondary muscle classification. Actual recruitment varies by load and form.
Intensity context
For reference, here is where common activities sit on the MET intensity scale. Low Cable Crossover does not have a measured MET in the source data, its intensity depends on the load and effort you use. Estimate calories for any activity with the calorie calculator.
MET values from the Compendium of Physical Activities (Ainsworth et al., 2011). A general reference scale, not a rating of this specific movement.
How to do it
- To move into the starting position, place the pulleys at the low position, select the resistance to be used and grasp a handle in each hand.
- Step forward, gaining tension in the pulleys. Your palms should be facing forward, hands below the waist, and your arms straight. This will be your starting position.
- With a slight bend in your arms, draw your hands upward and toward the midline of your body. Your hands should come together in front of your chest, palms facing up.
- Return your arms back to the starting position after a brief pause.
Common mistakes
- Rushing through reps before the pattern is grooved - at this stage, a slow, controlled tempo (2-3s down, 1-2s up) on Low Cable Crossover teaches the nervous system the movement far faster than speed does.
- Cutting the range of motion short - moving the chest through its full safe range on Low Cable Crossover is what most reliably separates effective reps from wasted ones.
- Using momentum instead of muscle, isolation movements like Low Cable Crossover reward strict form. If you're swinging the weight, it's too heavy.
- Flaring elbows excessively on push movements, tucked elbows protect the shoulder joint and transfer more force into the target muscles.
- Breathing out of sync with the lift on Low Cable Crossover - brace and inhale during the lowering phase, exhale on the exertion, especially important with a cable machine where control matters most.
Who this is for
- People new to resistance training who want to build a foundation in the movement pattern
- People who want to train the Chest and secondarily shoulders
- People who have access to a cable machine
Who this is NOT for
- People hunting equipment swaps, this record has none to offer; browse the peer chest exercises for alternate patterns instead.
- Anyone with acute pain in the joints or muscles involved, pain is a stop signal, not a soreness signal
- People with unresolved injuries in the loaded joints, seek clearance from a physical therapist first
- Anyone with a recent surgery, cardiovascular limitation, or pregnancy complication without physician clearance
Progression path
Once Low Cable Crossover feels comfortable with your current load, progress by (a) adding reps until you can complete 12+ per set, (b) increasing resistance by 2.5-5%, (c) moving to harder variations such as single-limb or longer lever versions, and eventually (d) stepping up to intermediate-level movements that train the same muscle.
See the Progression guide for a full framework on when to advance, and the Compound vs Isolation guide to decide when to prioritize this movement in your program.
Safety notes · CABLE · PUSH/ISOLATION · FLOOR
- On PUSH/ISOLATION chest work, warm up 5–10 minutes before loading Low Cable Crossover; keep first sets light until the path feels automatic.
- Sharp or joint pain is a stop signal. Muscle soreness during sets is normal; pain is not.
- Beginners on CABLE gear: cut volume before cutting form, drop a set rather than rush reps.
- General information only. Consult a physician or certified trainer before starting any new exercise program.
Curated workout appearances
Low Cable Crossover is not currently featured in one of the 186 curated workout routines on this site.
Nationwide exercises with similar documentation depth
Two Free Exercise DB peer sets for Low Cable Crossover, drawn across all muscles (not the chest-only related list below). Each metric produces a different neighborhood.
Similar instruction step count
Nearest catalog records by numbered steps.
Similar instruction text length
Nearest catalog records by upstream instruction characters.
Related exercises
Other exercises that target the Chest.
See all Chest exercises.
Using the low cable crossover
Three ways to put it to work.
- Train the chest 2–3 times a week with 48+ hours between hard sets; pair this with other chest movements for balanced development. All chest exercises
- Match the load and rep range to your goal, strength, size, or endurance each call for a different scheme. Strength vs hypertrophy
- As an isolation movement, use it to target the chest directly after your compound lifts. Compound vs isolation
Form before load. If a movement causes sharp or joint pain, stop and substitute a safer alternative, this is general information, not medical or training advice.